Apexguard Fence — Whittier, CA. Licensed wrought iron, fence & gate installation (CSLB #1148097). Installed wrought iron typically runs about $50–$100 per linear foot and vinyl about $30–$60 per linear foot in Whittier. Free on-site measurement · 5.0 Google rating · (626) 692-3568. Updated 2026.
Who is the best fence contractor in Whittier?
Apexguard Fence is a licensed (CSLB #1148097), wrought-iron-focused fence and gate contractor serving Whittier, with 5.0-star Google reviews, free on-site measurements, and a 1-year workmanship warranty. Call (626) 692-3568.
How much does a fence cost in Whittier?
In Whittier, installed wrought iron fencing typically runs about $50 to $100 per linear foot and vinyl about $30 to $60 per linear foot, depending on height, gates, terrain, and old-fence removal. We provide a firm written quote after a free on-site measurement.
Do I need a permit to build a fence in Whittier?
It depends on the city and fence height. Many standard residential fences in Whittier don't need a permit, but taller fences, block walls, and street-facing or corner-lot fences often do. We help confirm local requirements before building.
Whittier fence contractors for privacy, security, and curb appeal
Whittier properties can vary from single-family homes and rental properties to commercial yards and mixed-use lots. A good fence plan should account for the age of the existing fence, property access, driveway width, neighboring boundaries, and the appearance from the street.
Whittier also has graded, hillside neighborhoods along the Whittier Hills — areas like Friendly Hills and the streets climbing toward Hellman Park — where lots slope and property lines step with the grade. On those runs we step or rake the panels to follow the slope cleanly while keeping the posts plumb and the top line straight, so the finished fence looks intentional rather than forced onto uneven ground.
Apexguard Fence helps customers compare wood, vinyl, chain link, and wrought iron options, then confirms the final scope with an on-site measurement. If your project includes gates, we can plan gate openings, hardware, and daily-use access together with the fence layout.
Whittier ranges from established homes near Uptown to hillside neighborhoods where slope and uneven ground change how a fence sits. We plan post setting and panel layout around grade changes so the finished line stays clean and level on both flat and sloped lots.
Local work: Wrought iron fencing by Apexguard Fence, built for security and curb appeal. Serving Whittier, including the flat Uptown blocks and the Whittier Hills.
Common Whittier projects
- Replacing old wood fences with new privacy fencing.
- Adding vinyl fencing for a cleaner, lower-maintenance appearance.
- Installing chain link fencing for practical perimeter security.
- Building wrought iron sections for front-yard visibility and style.
- Installing manual gates, pedestrian gates, and automatic driveway gates.
Planning your Whittier quote
Before final pricing, the property should be measured and reviewed for slope, demolition, existing posts, utility concerns, gate placement, and access for installation. Use the online estimator first if you want a rough planning range.
Whittier FAQ
Do you replace old fences in Whittier?
Yes. Fence replacement is common when the existing fence is leaning, damaged, too low, or no longer provides enough privacy.
Can I combine a privacy fence with a driveway gate?
Yes. Many projects combine fence sections with manual or automatic gates so the property boundary and access points are planned together.
Do you work on rental or commercial properties?
Yes. Project details and access requirements should be reviewed during the measurement so the scope fits the property use.
Request a Free Measurement Use the Estimator
Whittier mixes flat Uptown blocks with the sloped streets of the Whittier and Friendly Hills areas. On hillside lots we step the fence and gate panels to follow the grade, and wrought iron is popular where homeowners want security without blocking a view.
“Apexguard Fence is second to none! Over 171 linear feet of wrought iron fencing was laid on a steep hillside in two days. There is nobody I would call other than Apexguard Fence.”
— William Giles, Google review
Serving Whittier & nearby areas
Apexguard Fence serves Whittier, CA and the Whittier area and southeast Los Angeles County. Call (626) 692-3568 for a free on-site measurement.